Kodak Digital Photo Frame Picture Frame User Manual

KODAK Smart Picture Frame  
User’s Guide (non-Networked  
Version)  
Congratulations! You now can view your favorite pictures in new and exciting  
ways. You can:  
m Store and view up to 36 pictures in your Smart Picture Frame.  
m View pictures from your COMPACTFLASH Card.  
m Create custom slide shows, showcasing your favorite pictures.  
NOTE: This product is network-capable. However, this configuration does  
not support networking features at this time.  
 
1 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1  
Unpacking the Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Caring for Your Smart Picture Frame . . . . . . . . . . . . . . . . . . .2  
2 Getting Connected. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Connecting the Power Cord. . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Learning the Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Turning the Frame On and Off . . . . . . . . . . . . . . . . . . . . . . . . .5  
Setting the Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
3 Adding Pictures to Your Smart Picture Frame . . . . . . . 7  
Inserting a COMPACTFLASH Card. . . . . . . . . . . . . . . . . . . . . .8  
Copying Pictures From a COMPACTFLASH Card . . . . . . . . . .9  
4 Enjoying Your Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Viewing Pictures in the Frame Memory . . . . . . . . . . . . . . . . . .11  
Viewing Pictures on a COMPACTFLASH Card . . . . . . . . . . . . 12  
Still Picture Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Slide Show Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Rotating Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Deleting Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
i
 
5 Customizing Your Smart Picture Frame . . . . . . . . . . . . .17  
Setting On and Off Times. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Keeping Your Picture Frame Secure . . . . . . . . . . . . . . . . . . . .18  
6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
7 Limited Warranty and Regulatory Information. . . . . . . 23  
Electrical Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Limited Warranty and Limitation of Liability . . . . . . . . . . . 23  
How to Obtain Replacement. . . . . . . . . . . . . . . . . . . . . . . . . 25  
Federal Communications Commission Statement . . . . . . 25  
Canadian ICES-003 Statement . . . . . . . . . . . . . . . . . . . . . 26  
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
ii  
 
1 Getting Started  
1
Unpacking the Box  
KODAK Smart  
Picture Frame  
Documentation  
Packet  
AC Power Supply  
1
 
     
Unpacking Your Frame  
Always handle your KODAK Smart Picture Frame with care. Though it is  
designed for durability, the liquid crystal display (LCD) is fragile and could be  
damaged if it is dropped or struck.  
Something Missing? Something Damaged?  
Locate the serial number on the back of your frame, and call 1-800-235-6325  
for Kodak Customer Support.  
NOTE: Keep the original product packaging in case you need to return the  
frame or move it to a new location.  
Choosing a Location  
Locate your frame where it's easy to see and is away from direct sunlight and  
exposure to extreme temperatures.  
Caring for Your Smart Picture Frame  
m Do not allow liquids to come in contact with the frame.  
m If necessary, clean the screen with a damp cloth.  
m If your frame must be cleaned, treat it like other fine wood furniture;  
gently apply wood cleaners, or use a damp cloth. Do not allow the cleaner  
to contact the screen.  
CAUTION: Avoid using alcohol-based window cleaners, as these can  
damage the protective screen surface. Do not spray liquid  
cleaners around the frame; these can damage the electronics.  
2
 
         
2 Getting Connected  
NOTE: This product is network-capable. However, this configuration does  
not support these networking features at this time:  
2
m Share!  
m Set Update Times  
m Channels  
m Update Now!  
m Order Prints  
m Frame Locking  
m Advanced/Set Dialing Options  
Connecting the Power Cord  
1
Plug the power cord into the  
bottom of the frame.  
NOTE: Even if the power is  
disconnected from the Smart  
Picture Frame, your stored  
pictures are safe.  
Power Cord  
2
Plug the power supply into the  
wall socket.  
Power Supply  
and Cord  
3
 
     
Learning the Buttons  
Menu  
Left Arrow  
OK  
Right Arrow  
Share!  
On/Off  
Pictures/Channels  
COMPACTFLASH  
Card Slot  
On/Off  
Pictures/Channels Switches the display between pictures and channels*  
Menu Toggles the menu on and off; cancels an operation  
Right/Left Arrows Displays next or previous picture or menu option  
Turns the frame on and off  
OK  
Selects the current menu option, or a picture  
Sends pictures*  
Share!  
* Not supported in this configuration  
4
 
   
Turning the Frame On and Off  
To turn the frame on, press the  
On/Off button or any other  
button.  
On/Off Button  
To turn the frame off, press the  
On/Off button.  
2
Setting the Time  
The first time you turn on the frame, you are prompted to set the time:  
1
Use the arrow buttons on the top of the frame to adjust the hour, then press  
OK.  
2
3
4
Use the arrow buttons to set the minutes, then press OK.  
Use the arrow buttons to select AM or PM, then press OK.  
Accept or re-enter the settings. When finished, press OK.  
If you want to adjust the time after the initial setting:  
1
Press the Menu button.  
2
3
4
Select Advanced, then press OK.  
Select Set the Time, then press OK.  
Go to Step 1 of the previous procedure.  
5
 
   
 
3 Adding Pictures to Your  
Smart Picture Frame  
The easiest way to transfer pictures from a digital camera to your Smart Picture  
Frame is by using a COMPACTFLASH Card. The frame has a built-in reader that  
supports Type I and Type II COMPACTFLASH Cards.  
3
NOTE: Look for the COMPACTFLASH logo on the card.  
KODAK COMPACTFLASH Cards are available from a dealer of KODAK products,  
7
 
 
Inserting a COMPACTFLASH Card  
1
Eject the COMPACTFLASH Card from  
your camera.  
2
Insert the card into the slot on the  
right side of the Smart Picture  
Frame.  
NOTE: Make sure that the connectors  
on the card are facing the Smart  
Picture Frame.  
8
 
     
Copying Pictures From a COMPACTFLASH  
Card  
1
Insert a COMPACTFLASH Card into the Smart Picture Frame, and press the  
Menu button.  
2
3
Select Copy. Press OK.  
Select From the CF Card to the Frame. Press OK.  
Thumbnail views of the pictures on your COMPACTFLASH Card are  
displayed. If more than 8 pictures reside on the card, use the Get Next  
and Get Last 4 Pictures functions.  
4
5
Use the arrow buttons to select a picture you want to copy. Press OK.  
A check mark appears over the selected picture.  
Continue until desired pictures are selected, then select Continue to  
confirm copy. Press OK.  
3
All selected pictures are displayed.  
6
7
Press OK.  
Review the pictures. If these are the pictures you want to copy from the  
card to the frame, select Copy Pictures and press OK.  
The selected pictures are copied from the card to the frame.  
If there is insufficient memory to copy all of the selected pictures, a warning  
message appears. You should either:  
m Repeat the process, selecting fewer images to copy, or  
m Delete some pictures from the frame to free up room. See “Deleting  
Pictures” on page 15.  
9
 
     
NOTE: When you copy a high resolution picture (greater than 640 x 480  
pixels) from a card to the frame, the picture is reduced to 640 x 480 pixels.  
This allows the frame to store the maximum number of images. Due to this  
compression, these pictures may appear with black bars above and below,  
or on the sides.  
If you want to retain a copy of a picture in its original higher resolution,  
do not delete this picture from the card.  
You do not need to copy pictures to the frame. When a card is inserted, the  
pictures on the card are displayed.  
10  
 
4 Enjoying Your Pictures  
Viewing Pictures in the Frame Memory  
1
Make sure that you are in Picture viewing  
mode (via the Pictures/Channels button).  
2
Use the arrow buttons to move forward and  
backward through the pictures.  
If the frame is in Still Picture Mode, the  
picture on the screen remains there until  
you change it. See “Still Picture Mode” on  
page 13.  
If the frame is in Slide Show Mode, the  
pictures advance automatically. See  
“Slide Show Mode” on page 13.  
Pictures/Channels  
Button  
4
11  
 
     
Viewing Pictures on a COMPACTFLASH  
Card  
1
Insert a COMPACTFLASH Card into the Smart Picture Frame. (See  
“Inserting a COMPACTFLASH Card” on page 8.)  
The frame displays the last picture on the card-typically the most  
recent picture taken. Then, the frame scrolls through pictures stored  
on the frame followed by pictures from the card.  
2
Use the arrow buttons to scroll through your pictures, or view them as a  
part of the slide show. (See “Slide Show Mode” on page 13.)  
NOTE: If the pictures on the card were captured at a resolution higher  
than that of the frame (larger than 640 x 480 pixels), it may take some  
time to scale each picture.  
Set COMPACTFLASH Card Icon Display  
A small CF symbol in the lower right corner indicates that the current picture  
resides on a card (not in the frame memory). To enable or disable the display  
this icon:  
1
Press the Menu button.  
2
3
4
Select Advanced, then press OK.  
Select Set CF Icon Display, then press OK.  
Use the arrow buttons to select either:  
m Yes (the CF icon will appear when the frame displays pictures from a  
card)  
m No (the CF icon will not appear)  
When finished, press OK.  
5
Accept or re-enter the settings. When finished, press OK.  
12  
 
       
Still Picture Mode  
To display a single picture, put your Smart Picture Frame in Still Picture Mode.  
1
Press the Menu button.  
2
3
4
Select Slide Show. Press OK.  
Use the arrow buttons to select Pause Show. Press OK.  
Use the arrow buttons to select Accept Setting. Press OK.  
The picture on the frame is displayed until you:  
m Change the Slide Show settings.  
m Use the arrow buttons to move to a different picture.  
Slide Show Mode  
In Slide Show Mode, the Smart Picture Frame continually cycles through all of  
the pictures in the frame. If a COMPACTFLASH Card is inserted, pictures on the  
card are displayed after pictures in the frame memory.  
4
1
Press the Menu button.  
2
Select Slide Show. Press OK.  
3
Use the arrow buttons to select the time you would like each picture to  
remain on the screen. Press OK.  
4
Select Accept Setting. Press OK.  
The slide show runs as programmed until you change the settings. The  
slide show setting does not apply to pictures on a card.  
13  
 
       
Rotating Pictures  
Your Smart Picture Frame can rotate images to  
fit the landscape format of the frame.  
1
2
Press the Menu button.  
Select Rotate. Press OK.  
Thumbnail views of pictures on the frame are displayed. If more than  
8 pictures reside on the frame, use the Get Next and Get Last 4 Pictures  
functions.  
3
4
5
Use the arrow buttons to select the picture you want to rotate.  
Press OK for each 90° you want to rotate the image clockwise.  
Press the arrow buttons to select another picture to rotate, or the Finish  
and Return to Viewing button to exit Rotate mode.  
NOTE: You cannot rotate pictures that reside on a card. However, you can  
copy pictures from the card to the frame (see “Copying Pictures From a  
COMPACTFLASH Card” on page 9), then follow the above procedure.  
14  
 
   
Deleting Pictures  
NOTE: Pictures deleted from a card or from the frame cannot be  
recovered. Use caution if you have elected to disable the 'CF' icon.  
1
Press the Menu button. Select Delete. Press OK.  
Thumbnail images of the pictures on your frame and card (if inserted)  
are displayed. If more than 8 pictures reside on the frame or card, use  
the Get Next and Get Last 4 Pictures functions.  
2
Use the arrow buttons to move through the images. When a picture you  
wish to remove is highlighted, press OK.  
An “X” appears over that image. (To deselect the picture, press OK  
again.)  
3
4
When all the pictures that you wish to remove are selected, use the arrow  
buttons to highlight the Continue to Confirm Deletion button. Press OK.  
When the Delete Confirmation screen appears, press OK, select Delete  
Pictures, and press OK again. Select Cancel Deletion to exit without  
deleting any pictures. Press OK.  
4
NOTE: The frame ships loaded with a set of stock pictures. These can be  
deleted using the above procedure.  
15  
 
   
Archiving Pictures on COMPACTFLASH Cards  
You can store your pictures by copying them to a COMPACTFLASH Card. Insert  
a card into the Smart Picture Frame and follow these steps:  
1
Press the Menu button.  
2
3
Select Copy. Press OK.  
Select From the Frame to the CF Card. Press OK.  
Thumbnail views of pictures on the frame are displayed. If more than  
8 pictures reside on the frame, use the Get Next and Get Last 4 Pictures  
functions.  
4
Use the arrow buttons to select the pictures to copy. Press OK to mark each  
picture for copying.  
5
6
7
When finished, select Continue to confirm copy. Press OK.  
Review the pictures. Press OK.  
If these are the pictures you want to copy, select Copy Pictures. Press OK.  
Depending on the number of pictures selected, copying may take from  
several seconds to several minutes.  
If there is insufficient memory to copy all selected pictures, a warning message  
appears. (This message does not remain on the screen.) You should either:  
m Repeat the process, selecting fewer images to copy, or  
m Delete some pictures on the card to make room for the pictures.  
16  
 
 
5 Customizing Your Smart  
Picture Frame  
Setting On and Off Times  
You can program your KODAK Smart Picture Frame to turn off when you are  
asleep or away from home. By default, the Smart Picture Frame turns off at 12  
p.m. (midnight) and back on at 6 a.m.  
NOTE: In order for the On/Off Times feature to work properly, the correct  
time must be set. To check or set the time, press the Menu button. Select  
Advanced, and press OK. Select Set the Time, and press OK.  
1
Press the Menu button.  
2
3
4
Select the On/Off Times function. Press OK.  
Select Change On/Off Times. Press OK.  
Use the arrow buttons to select the hour for the frame to turn off, followed  
by the minutes, and AM or PM. Press OK to accept the time.  
5
5
6
Repeat the settings for the on time. Press OK to accept the time.  
Confirm the time settings. Press OK.  
You can also disable the On/Off Times function.  
17  
 
     
Keeping Your Picture Frame Secure  
If your frame is in a location where theft is a possibility, you can physically lock  
your frame using a locking cable (not included) from Kensington Technology  
The Kensington lock slot is on the back of the  
Smart Picture Frame and is indicated with a  
lock symbol. Follow the directions that come  
with the lock and cable.  
Kensington  
Lock  
18  
 
     
6 Troubleshooting  
The KODAK Smart Picture Frame was designed for ease of use and reliability.  
This chapter will help you resolve the most common challenges.  
Should you require further assistance, there are extensive resources available  
do not have Web access, call 1-800-235-6325.  
Problem  
Possible Cause  
Suggestion  
Smart Picture The backlight may be Press any button. You may need to  
Frame won’t off.  
turn on.  
wait for up to 1 minute for the frame  
to turn on.  
There is no power to  
frame.  
1
Unplug the power cord from the  
wall and plug it into a working  
power outlet. Then, press the  
Pictures/Channels button and  
wait up to 1 minute for the frame  
to turn on.  
6
2
3
If there is a surge protector in-  
line, remove it.  
Is the power outlet that is in use  
connected to a wall switch?  
19  
 
   
Problem  
Possible Cause  
Suggestion  
Smart Picture There is only one  
Press the Menu button, then select  
Frame does picture in the frame. Copy. You should see thumbnail  
not advance to  
next picture.  
views of the pictures in the frame.  
If only one thumbnail is shown, you  
only have one picture in the frame.  
You are viewing high- If, after pressing the right arrow  
resolution pictures on button, you have to wait more than 5  
the COMPACTFLASH minutes for a picture to appear,  
Card. High-resolution remove the COMPACTFLASH Card  
pictures can take  
and try again.  
some time to display.  
You are in Still display Press either arrow button to advance  
mode. (Pause Show is to another picture.  
selected as Slide Show  
menu option.)  
The menu  
keeps  
The menu disappears Make a menu selection before 1  
automatically after 1 minute elapses.  
disappearing. minute if there is no  
input to the frame.  
This ensures that you  
always see pictures on  
your screen.  
20  
 
Problem  
Channel  
Possible Cause  
Suggestion  
Frame is not  
1
Press the Menu button.  
display pops connecting to the  
up every 20 network.  
minutes.  
2
Select Advanced Settings, then  
Channel AutoDisplay Rate.  
Select Never.  
3
Thesefeatures Frame is not  
Do not try to use these features; the  
frame is not configured for network  
connection.  
are not  
connecting to the  
available:  
network.  
m Channels  
m Share!  
m Print  
Order  
m Update!  
Now  
Cannot set  
update times.  
6
21  
 
Problem  
Possible Cause  
Suggestion  
No thumbnail The image file does If available, use a version of the  
view of a  
picture.  
not contain EXIF  
picture that has not been  
manipulated.  
information. The  
directories of some  
older digital cameras  
are not compatible  
with the frame. The  
image file or card may  
be corrupt.  
To determine if the file or card is  
corrupt, attempt to display:  
m Another picture from the same  
card  
m Pictures from another card  
Further assistance is available online  
and select Technical Support.  
Cannot view a  
movie.  
The frame does not support movie  
playback nor the display of a  
thumbnail.  
22  
 
7 Limited Warranty and  
Regulatory Information  
Electrical Cautions  
WARNING! For protection against the risk of electrical shock,  
always disconnect all cables from the wall and from  
the KODAK Smart Picture Frame prior to servicing or  
modifying the frame.  
The KODAK Smart Picture Frame should only be used with a UL listed and  
Kodak approved Class 2 Power Supply with a rated input of 110V ~ 120V @  
50/60Hz while supplying a rated output of [email protected] Amps to the KODAK  
Smart Picture Frame.  
Limited Warranty and Limitation of  
Liability  
Kodak warrants the KODAK Smart Picture Frame to be free from malfunctions  
and defects in both materials and workmanship for a period of 1 (one) year  
from the date of purchase as evidenced by a copy of your receipt(s).  
This warranty does not cover: circumstances beyond Kodak's control; service  
or parts to correct problems resulting from alterations not marketed or  
authorized by Kodak; failure to follow Kodak's operating instructions; misuse;  
or abuse.  
7
23  
 
       
KODAK DISCLAIMS ALL OTHER WARRANTIES OR CONDITIONS, EITHER  
EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY,  
FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN THE  
EVENT THAT THE EXCLUSION OF ANY IMPLIED WARRANTY OR CONDITION IS  
INEFFECTIVE UNDER THE LAW, THE DURATION OF THE IMPLIED WARRANTY  
WILL BE ONE YEAR FROM THE DATE OF PURCHASE. No oral or written  
information or advice given by Kodak, its dealers, distributors, agents or  
employees shall create a warranty or in any way increase the scope of this  
warranty.  
REPAIR OR REPLACEMENT, AT KODAKS OPTION, WITHOUT CHARGE ARE  
KODAK'S ONLY OBLIGATIONS UNDER THIS WARRANTY. KODAK WILL NOT BE  
RESPONSIBLE FOR ANY DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL OR  
INCIDENTAL DAMAGES RESULTING FROM THE PURCHASE, USE, OR  
IMPROPER FUNCTIONING OF THE KODAK SMART PICTURE FRAME  
REGARDLESS OF THE CAUSE, EVEN IF KODAK HAS BEEN ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGES. Such damage for which Kodak will not be  
responsible include, but is not limited to, loss of revenue or profit, downtime  
costs, loss of use of the KODAK Smart Picture Frame, cost of any substitute  
equipment, facilities or services, or claims of your customers for such  
damages.  
Kodak's total liability to you for actual damages for any cause whatsoever will  
be limited to the amount paid by you for the KODAK Smart Picture Frame.  
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF  
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION OR  
LIMITATION MAY NOT APPLY TO YOU.  
24  
 
How to Obtain Replacement  
To obtain repair or replacement, call 1-800-235-6325 for Kodak Customer  
Support.  
When returning a KODAK Smart Picture Frame, pack the KODAK Smart Picture  
Frame in the original packaging materials. A problem report should also be  
enclosed with the KODAK Smart Picture Frame. If the original packaging  
materials has been discarded or is not available, packaging will be at the  
owner's expense.  
Federal Communications Commission  
Statement  
This product complies with Part 15 of the FCC rules. Operation is subject to the  
following two conditions: (1) This product may not cause harmful  
interference, and (2) this product must accept any interference received,  
including interference that may cause undesired operation.  
NOTE: This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are  
designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation.  
7
25  
 
     
If this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and on, the  
user is encouraged to try and correct the interference by one or more of the  
following measures:  
m Reorient or relocate the receiving antenna.  
m Increase the separation between the equipment and the receiver.  
m Connect the equipment into a power outlet driven by a different circuit  
from that which is used by the receiver.  
m Consult the dealer or an experienced radio/TV technician for assistance.  
CAUTION: Changes or modifications not covered in this manual must  
be approved in writing by the manufacturer's Regulatory Engineering  
Department. Changes or modifications made without written  
approval may void the user's authority to operate this equipment.  
Responsible Party:  
Eastman Kodak Company  
Rochester, NY 14650 USA  
Canadian ICES-003 Statement  
This Class B digital apparatus complies with all requirements of the Canadian  
Interference Causing Equipment Regulations.  
Cet appareil numérique de la classe B respecte toute les exigences du  
Réglement sur le matériel brouilleur du Canada.  
The Canadian Department of Communications label identifies certified  
equipment. This certification means that the equipment meets certain  
telecommunications network protective, operational, and safety requirements.  
The department does not guarantee the equipment will operate to the user's  
satisfaction.  
26  
 
 
Before installing this equipment, users should ensure that it is permissible to  
be connected to the facilities of the local telecommunications company. The  
equipment must also be installed using an acceptable method of connection. In  
some cases, the inside wiring of a building or home associated with a single  
line of service may be extended by means of a certified connector assembly  
(telephone extension cord).  
The customer should be aware that compliance with the above conditions may  
not prevent degradation of service in some situations.  
Repairs to certified equipment should be made by an authorized Canadian  
maintenance facility designated by the supplier. Any repairs or alterations  
made by the user to this equipment, or equipment malfunctions, may give the  
telecommunications company cause to request the user to disconnect the  
equipment.  
Users should ensure for their own protection that the electrical ground  
connections of the power utility, telephone lines, and internal metallic water  
pipe system, if present, are connected together. This precaution may be  
particularly important in rural areas.  
WARNING! Users should not attempt to make such connections  
themselves, but should contact the appropriate  
electric inspection authority, or electrician, as  
appropriate.  
Notice: The LOAD NUMBER (LN) assigned to each terminal device denotes the  
percentage of the total load to be connected to a telephone loop which is used  
by the device to prevent overloading. The termination on a loop may consist of  
any combination of devices subject only to the requirement that the sum of the  
LOAD NUMBERS of all of the devices does not exceed 100.  
7
27  
 
   
Disposal  
The KODAK Smart Picture Frame LCD contains a small amount of mercury.  
Disposal of this material may be regulated, due to environmental  
considerations. For disposal or recycling information, please contact your  
local authorities.  
Disclaimers  
This manual was developed and published by Kodak. It includes the most  
current information known at the time of publication. The contents of this  
manual and the specifications of the KODAK Smart Picture Frame are subject to  
change without notice. Kodak reserves the right to make changes without  
notice to the specifications, materials, and processes detailed herein and shall  
not be responsible for any damages caused by reliance on this information,  
including but not limited to, typographical, factual, and other errors relating to  
this manual.  
28  
 
     
E
B
Box Contents 1  
Button Overview 4  
C
K
Cable Lock 18  
Caution  
Canadian Electrical 27  
Electrical 23  
CF Symbol 12  
Choosing a Location 2  
Cleaning 2  
COMPACTFLASH Card  
Archiving Pictures 16  
Copy Pictures to Frame 9  
Inserting 8  
Set Icon Display 12  
Viewing Pictures 12  
Connecting Power Cord 3  
Contents of the Box 1  
Customer Support 2  
L
Landscape Mode 14  
LCD  
Cleaning 2  
Unpacking 2  
Load Number, LN 27  
Location, Choosing 2  
M
Mode  
Landscape 14  
Portrait 14  
Slide Show 13  
Still Pictures 13  
O
D
Overview of Buttons 4  
Deleting Pictures 15  
Disposal 28  
P
Pictures  
 
29  
Deleting 15  
V
Rotating 14  
Viewing  
Slide Show Mode 13  
Still Picture Mode 13  
View From Card 12  
View From Memory 11  
Pictures in Memory 11  
Pictures on a Card 12  
W
Warning  
Canadian Electrical 27  
Electrical 23  
Portrait Mode 14  
Power Cord 3  
Problem Solving 19  
R
Recycling 28  
Replacement 25  
Rotating Pictures 14  
S
Security 18  
Setting On and Off Times 17  
Slide Show Mode 13  
Still Picture Mode 13  
T
Troubleshooting 19  
U
Unpacking the Box 1  
30  
 
 

Infinity Speaker System Total Speaker Solutions User Manual
Insignia Speaker System NS B1110 User Manual
JAMO Portable Speaker IW 827 LCR User Manual
Jenn Air Ventilation Hood W10272061 User Manual
John Deere Tiller RR2109 User Manual
JVC Car Stereo System KS K1416 User Manual
JVC Security Camera VN C215VP4U User Manual
Kenwood Marine Radio 2000X User Manual
Kodak Digital Camera CX7300 User Manual
Konica Minolta Digital Camera Dinax 7D User Manual